GuidesCompare 2.4, 5 and 6 GHz connections

Guide 21

Compare 2.4, 5 and 6 GHz connections

Measure the symptom, compare like-for-like conditions and draw a conclusion supported by the recorded evidence.

Where you will workVisible Hotspots · Connection details · Speedtest

AllowDepends on the symptom and observation period

Watch the key steps

This related overview shows see which nearby wi-fi networks share channels. Follow the question-specific steps below to complete your investigation.

A 40-second narrated overview. Follow the full instructions below when you try it.

Read the video transcript

Start from the nearby list. Open Visible Hotspots and choose Wi-Fi. Clear search and minimum-signal filters for an initial overview from the same location.

Match the network and curve. Select a network to highlight its curve and band. Use the colored legend to select and reveal the matching list row.

Check radio details. Expand Technical details and services to read the reported frequency, band and center channel. Missing fields remain unknown.

Save a comparison. Export the selected band's diagram and filtered rows. Curve widths are illustrative; overlapping curves do not establish interference. Use recorded history to assess stability.

Open the app view at full size to inspect its controls.

Before you start

Give your result a useful basis

  • Use only networks and devices you are authorized to investigate.
  • Record the location, time and active connection. Keep useful history and compare similar observation conditions.

Measure

Check the bands and technical details reported by your adapter for networks you may use. Confirm the connected access point and band before measuring performance where you normally work.

Compare

Try the available bands at the same locations and under comparable demand. Compare observed stability, connection sessions, latency and measured speed instead of selecting by band name alone.

Interpret

Choose the band that meets your range and performance needs in those measurements. A higher-frequency band can offer useful capacity nearby while walls and distance can change which connection works best.

Check what you gained

You can now check that

  • You have measurements and a comparison relevant to your question, with observation gaps and uncertainties preserved.

Updated by Hotspot Observer · 2 November 2026